PEMENOL
PEMENOL 7-in-1 Retro Game Console Soldering Kit
8.8 / 10
Solder a working handheld game console — with three difficulty levels.
Check Price →
Read full review →
We earn a commission, at no extra cost to you.
Project Kits Best Audio Project
LEPANDA DIY FM Radio Soldering Kit Review
Reviewed by Kerem Başbuğ · Last updated June 19, 2026 · How we rank
8.2 / 10 · our score
Solder together a functioning FM radio with a 2-inch speaker and acrylic enclosure. Hearing your build play actual stations is a uniquely satisfying first-project moment.
Quick Specs
- Brand
- LEPANDA
- Category
- Project Kits
- Price tier
- Budget ($)
- Our score
- 8.2 / 10
- Best for
- STEM students and hobbyists who want an audio payoff.
Our verdict
There is a particular thrill the moment your soldered radio crackles into a real station. With a proper speaker and a case to house it, this kit produces a result you can use, and the tuning section adds a slightly more advanced challenge than a plain LED board.
Pros & cons
Pros
- Finished radio actually receives FM stations
- 2-inch speaker and acrylic case included
- Memorable, audible result
- Good high-school STEM project
Cons
- Tuning components need care
- Iron and solder not included
Check Price on Amazon →
We earn a commission, at no extra cost to you.
Key features
- DIY FM radio with 2-inch speaker
- Acrylic case included
- Through-hole soldering project
- STEM education focus
What's in the box
- FM radio PCB and components
- 2-inch speaker
- Acrylic case with fixings
- Iron, solder and power source not included
Contents come from the current Amazon listing and can change — check the listing before buying.
Getting started with the LEPANDA DIY FM Radio Soldering Kit
Radio boards are sensitive to sloppy joints around the tuning section, so keep your iron time short and your joints neat there. Fit the speaker wires last and give them a little slack before closing the case. When you power it up, expect to hunt for stations — a weak signal is usually the aerial arrangement rather than a soldering fault.
Who it's for
STEM students and hobbyists who want an audio payoff.
Alternatives worth considering
Diymore DIY FM Radio Soldering Kit
A cheaper FM build with a digital display and transparent case, if you want the same payoff for less.
MUXWELL DIY Bluetooth Speaker Soldering Kit
Costs more but adds Bluetooth and USB playback, so the finished unit gets used far more often.
LEPANDA DIY FM Radio Soldering Kit: common questions
Is this a good STEM classroom project?
It works well for high-school groups: the build teaches ordinary through-hole technique, and the audible result makes it obvious to everyone in the room whether a board works.
How good is the sound?
It is a small mono speaker in a plastic case, so expect clear speech and listenable music rather than hi-fi. The appeal is that it works at all from a board you assembled.
What if it does not pick up stations?
Check the aerial connection first, then reflow the joints around the tuning components. Poor reception indoors is common; moving near a window is often enough to confirm the radio itself is fine.
You might also like
MiOYOOW
MiOYOOW DIY Digital Clock Soldering Kit
8.5 / 10
A desk clock you built yourself — with an acrylic case to show it off.
Check Price →
Read full review →
We earn a commission, at no extra cost to you.
Gikfun
Gikfun LED Chaser Soldering Kit (81 LEDs)
8.3 / 10
81 LEDs and a lot of joints — repetition practice that ends in a light show.
Check Price →
Read full review →
We earn a commission, at no extra cost to you.
